NEXUS Disktwin Stop HDD Vibration DWT-2300
The Nexus DiskTwin is an ideal solution to get rid of any hard disk drive
vibration noise and resonance. Are you tired of all the hard disk seek and
vibration noises? Or is your hard disk creating resonance in your case? The
Nexus DiskTwin will alleviate your suffering!
The DiskTwin is made of two pieces of solid aluminum to augment the cooling
capacity of your hard disk, plus each piece is equipped with two high quality
solid rubber absorber blocks. Just remove the hard disk from your computer and
mount the DiskTwin on both sides of your 3.5" hard disk. Then re-mount the
complete unit in a free 5.25" drive bay and your done! No more agony!
Medical application
The Nexus DiskTwin is also suitable for medical equipment that requires mounting
of a hard disk drive without earthen. The DiskTwin allows you to mount the hard
disk drive without any direct contact with the chassis.
The DiskTwin will stop any HDD vibration noise and resonance and will maximize
hard disk cooling.
- Reduces hard disk vibration noise and resonance.
- High quality rubber shock and vibration absorption blocks
- Solid aluminum heat sink with thermal pads for more efficient cooling.
- The 3.5" hard disk equipped with the Nexus DiskTwin fits into any 5.25"
drive bay
Specifications:
Model number: DTW-2300A/B
Dimensions: 146.81x26.15x18.8 mm
Compatibility: 3.5" HDD
Weight: 105 grams (per unit)
Materials:
Solid Aluminum
Solid Rubber
Thermal Pad
Mounting Screws
Installation instruction:
1) Clean the two surfaces of the hard disk to which the
DiskTwin is to be mounted, removing any dust and oil.
2) Mount the DiskTwin onto the hard disk sides by using the
supplied (14mm) screws. Push the screws through the rubber block into the
mounting holes of the hard disk and tighten the screws
3) Mount the hard disk with DiskTwin into a 5.25” drive bay in
your system using the supplied (7,5mm) screws
4) (Re-)fix the connectors to your hard disk
| Style |
sku |
| Aluminum |
840556088899 |
| Black |
840556088905 |
