Anti-Vibration Mounting Kit
The Nexus Anti-Vibration mounting kit contains ideal solutions
for mounting your CPU cooler fan and system fans using rubber, tying together
any loose cables plus fitting your case on soft rubber feet. Five different
items to reduce vibration and preventing resonance.
- The Nexus mounting kit comes in a useful
case to keep little screws and components in. You will not loose them
anymore!
Then the
Nexus Anti Vibration Mounting Kit is the ideal solution for you to
get! Plenty of rubber mounting solutions for your case fans and the CPU fan,
soft rubber feet for your case and tie raps to keep the cables nice and tidy
together.
Dot your
i's and cross your t's.....tune your silent computer to the Max.
Specifications:
-
12 units rubber fan mounts
for open chassis fans
-
12 units rubber fan mounts
for closed chassis fans
-
12 units rubber grommets
with screws for hard disk drive mounting
-
4 units rubber feet with
adhesive
-
20 units tie raps
-
Packaged in a useful clear
plastic case
12 rubber fan mounts for open chassis fans
-
Prevents resonance, absorbs vibrations that
otherwise would be transmitted from the fan into the computer case
-
To be used on open chassis fans
-
4 units to be used per fan, so sufficient
rubber fan mounts for 3 fans
12 rubber fan mounts for closed chassis fans
-
Prevents resonance, absorbs vibrations that
otherwise would be transmitted from the fan into the computer case
-
To be used on closed chassis fans
-
4 units to be used per fan, so sufficient
rubber fan mounts for 3 fans
12 rubber grommets with screws for hard disk
drive mounting
-
Helps to reduce transmitted vibration noise
from the hard disk drive, by isolating the mounted hard disk drive from the
case chassis
-
Suitable for both 3.5"and 2.5"hard disk
drives
-
6 units to be used per 3.5" hard disk drive
or 4 to be used per 2.5"hard disk drive, so sufficient grommets and screws
for two 3.5" or three 2.5" hard disk drives
-
Can be used on several other components too!
4 units rubber feet with adhesive
-
Superb soft rubber feet to replace any hard
plastic version
-
Prevents the transition of unwanted
vibrations from inside a pc via the chasis into the desk or hard floor
-
With pre-applied adhesive tape
-
Can also be used on printers, speakers etc.
20 units tie raps
